Today we will explain How to  Root on Galaxy Core Prime VE SM-G361F with Official Firmware 5.1.1 Lolli SM-G361F Root process is not much different from most Samsung Phone devices, so if you made that before you will do it easily, if not don’t worry we are here to help you.


As we said, this Root Guide for official firmware only not for Custom ROMs. If you didn’t get this official update 5.1.1 Lollipop yet on your SM-G361F, so follow this link if available or use the site search here to see if we released this update here. If you didn’t find this update tell us in the comments and we will provide you with the link.

In this Guide we will use Pre-Rooted, because it is the easiest, most secure, and the best one for Rooting SM-G361F. We will use this Root method with a Windows based tool Called Odin.

1. This Root process at your own risk and  Galaxy Rom Website Team are not responsible for any damage caused on your phone as a result of doing it the wrong way.

2. This Root is only for Galaxy Core Prime VE SM-G361F and it is not for any other model, so don’t use it in any other model because it may damage your Phone.

3. You may need to make a backup for all of your important data to avoid data lose in case of any mistakes happened.

4.  Your Phone Battery must be 50% at least before starting the Rooting Process.

5.  Do not remove the cable from the phone while the Root is being installed.

6.  Attached images are only for explaining only and you may see small differences.

7.  You should be known that is the Rooting process will avoid your Phone Warranty and you will not be able to use your Warranty anymore and you will not be able to receiving OTA updates even if you removed the Root.

8. Again, this Root is only for Galaxy Core Prime VE SM-G361F not any other model.

Files required for installing the Root Galaxy Core Prime VE SM-G361F

How to Root in Galaxy Core Prime VE SM-G361F :

1. Download CF-Auto-Root for Galaxy Core Prime VE SM-G361F and extract the Zip file, and select the Pre-Rooted-klte-kltedx-smg900f.tar.md5

2.  Download Odin v3.10.7 and extract the Zip file: Odin v3.10.7.Zip

3.  Now, Turn off your phone and Boot your Galaxy Core Prime VE SM-G361F into Download Mode
   by pressing and holding the Volume Down + Home + Power buttons together
   (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.

4. You will get this alert as Shown in the following, press Volume up to continue 

5. Make sure that the USB Debugging mode is enabled, if not go to Developer Options and Enable USB Debugging Mode.

6. Run the Odin v3.10.7.exe or Odin3 v3.07.exe file as Administrator (Right click on the .exe file and Select Run as administrator)

7. Now connect your Galaxy Core Prime VE SM-G361F to your Computer via USB cable.

8. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at

9. ID:COM section and “Added!” text at the message box. This means your

10. device has been detected by Odin3.

11. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.

12. Now, click on the PDA button and select the Pre-Rooted-klte-kltedx-smg900f.tar.md5 file.

13. Finally, click on the Start button to begin the Rooting process, wait a few moments.

14. Once completed, you would see “PASS!” message in ID:COM Section with a Green Background.

15. Your phone should Reboot Automatically. You can now disconnect your phone from your Computer Safely.