Showing posts with label after. Show all posts
Showing posts with label after. Show all posts
Sunday, 25 December 2016
I317m sim relocked after flashing 6 0 1
I317m sim relocked after flashing 6 0 1
Hello,
My phone was unlocked (not sure how, bought it second hand years ago) and used it fine on 4.4 custom rom. Ive updated it onthursday to the revolution 6.0.1 (with 3.0.2 twrp, nano open gappsa) and used it fine without problems on thursday.
However, yesterday, it lost cell signal and would not reconnect. So i rebooted the phone and now it is asking me to put sim unlock pin. What is the best course of action to get unlocked 6.0.1? I couldnt find an unlock method for 6.0.1. Should i backup rom, go back to 4.4, unlock, then restore?
Thank you.
My phone was unlocked (not sure how, bought it second hand years ago) and used it fine on 4.4 custom rom. Ive updated it onthursday to the revolution 6.0.1 (with 3.0.2 twrp, nano open gappsa) and used it fine without problems on thursday.
However, yesterday, it lost cell signal and would not reconnect. So i rebooted the phone and now it is asking me to put sim unlock pin. What is the best course of action to get unlocked 6.0.1? I couldnt find an unlock method for 6.0.1. Should i backup rom, go back to 4.4, unlock, then restore?
Thank you.
from xda-developers http://ift.tt/2a5eet7
via IFTTT
Available link for download
Monday, 12 December 2016
install TWRP after install still getting into regular recovery
install TWRP after install still getting into regular recovery
Hey, My phone (LG G2 D802) is rooted ofcourse and I tried a few guides but none of them is working for me.
I tried for example to install the custom recovery through ROM manager, the app says that the version of my recovery is what I installed but then when I click on "get into recovery" it gets back to the regular lg g2 recovery.
any ideas for solutions?
I tried for example to install the custom recovery through ROM manager, the app says that the version of my recovery is what I installed but then when I click on "get into recovery" it gets back to the regular lg g2 recovery.
any ideas for solutions?
from xda-developers http://ift.tt/2a3kBCG
via IFTTT
Available link for download
Saturday, 26 November 2016
Bootloop after flash 4 19 707 4 in stead of 1 54 707 7
Bootloop after flash 4 19 707 4 in stead of 1 54 707 7
HTC One M8, wont boot after trying to make it back to stock. Was folowing this tutorial, but the link in thre for 1.54.707.7 backup doesnt work anymore so I flashed the latest one with same MID and CID, think it will be same just updated. But now HTC wont boot to system anymore. I have TWRP 2.8.1.0-m8. Any has a 1.54.707.7 backup ? Thanks.
version: 0.5
version-bootloader: 3.16.0.0000
version-baseband: 1.16.2133156.UA10G
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: SH46DWM04006
product: m8_ul
platform: hTCBmsm8974
modelid: 0P6B11000
cidnum: HTC__044
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: ab0efa49
hbootpreupdate: 11
gencheckpt: 0
version: 0.5
version-bootloader: 3.16.0.0000
version-baseband: 1.16.2133156.UA10G
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: SH46DWM04006
product: m8_ul
platform: hTCBmsm8974
modelid: 0P6B11000
cidnum: HTC__044
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: ab0efa49
hbootpreupdate: 11
gencheckpt: 0
from xda-developers http://ift.tt/2a6bgXV
via IFTTT
Available link for download
Friday, 25 November 2016
Note 2 N7100 Odin flash fail after NAND write Need fix
Note 2 N7100 Odin flash fail after NAND write Need fix
I have Galaxy Note 2 GT-N7100 International Model running Android 4.4.2 KitKat N7100XXUFNL1 firmware. It was working fine until recently it crashed and upon reboot it stuck on Samsung Note II logo.
While flashing stock firmware via Odin I get the following error. I also tried flashing latest TWRP but end up with the same error: NAND Write Start!! and fail
Odin Says:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNL1_N7100ODDFNI1_N7100DDUFND1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I hv tried different Odin versions including Odin 3.09, 3.11.1, 3.1.85, 3.4.0. Same error. Tried on Windows 10 an I dont have kies and tried all of my usb ports. Installed latest drivers + I hv never modified this device neither rooted or tinkered ever. Removed battery for each operation. I am afraid to use any PIT files as wrong PIT file may completely brick it.
Moreover, booting into stock recovery gets the following errors:
E:failed to mount /cache (Invalid argument)
E:Cant mount /cache
Installation aborted.
E:failed to mount /cache (invalid argument
E:Cant mount /cache/recovery/log
E:Cant open /cache/recovery/log
E:failed to mount /cache (Invalid argument)
E;Cant mount /cache/recovery/last_log
E:Cant open /cache/recovery/last_log
E:Failed to mount /cache (Invalid argument)
E:Cant mount /cache/recovery/last_install
E:Cant open /cache/recovery/last_install
E:Failed to mount /cache (Invalid argument)
However, I get recovery menus but cannot factory reset or wipe. I cant find a solution fo it. Any help will be appreciated.
While flashing stock firmware via Odin I get the following error. I also tried flashing latest TWRP but end up with the same error: NAND Write Start!! and fail
Odin Says:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNL1_N7100ODDFNI1_N7100DDUFND1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I hv tried different Odin versions including Odin 3.09, 3.11.1, 3.1.85, 3.4.0. Same error. Tried on Windows 10 an I dont have kies and tried all of my usb ports. Installed latest drivers + I hv never modified this device neither rooted or tinkered ever. Removed battery for each operation. I am afraid to use any PIT files as wrong PIT file may completely brick it.
Moreover, booting into stock recovery gets the following errors:
E:failed to mount /cache (Invalid argument)
E:Cant mount /cache
Installation aborted.
E:failed to mount /cache (invalid argument
E:Cant mount /cache/recovery/log
E:Cant open /cache/recovery/log
E:failed to mount /cache (Invalid argument)
E;Cant mount /cache/recovery/last_log
E:Cant open /cache/recovery/last_log
E:Failed to mount /cache (Invalid argument)
E:Cant mount /cache/recovery/last_install
E:Cant open /cache/recovery/last_install
E:Failed to mount /cache (Invalid argument)
However, I get recovery menus but cannot factory reset or wipe. I cant find a solution fo it. Any help will be appreciated.
from xda-developers http://ift.tt/2a6b6zI
via IFTTT
Available link for download
Thursday, 10 November 2016
INTEX MOBILE IN 4455 Display Blank After Replace LC Solution Here
INTEX MOBILE IN 4455 Display Blank After Replace LC Solution Here
Display Blank After SW Upgrade or Replaced LC Solution Here
10000000000000% tested


If Display goes Blank/Cant Power On properly after SW Upgrade or Replaced LCD.
Then the problem is due to SW/HW compatibility,need to do the SW upgrade properly as per the
HW.
If the available SW Ver is S:VI.4.34,S:VI.5.39 or S:VI.8.46,then service centers need to do
the SW upgrade as mentioned below. For example
1. For S:VI.4.34 :CO25_GE_PCB01_gprs_MT6225_S00.MAUI_GE_W08_12_M361_VI_9_56.20090707.oldtsb.4in1.bin
2. For S:VI.5.39 : CO25_GE_PCB01_gprs_MT6225_S00.MAUI_GE_W08_12_M361_VI_8_50.20090519.bin
3. For S:VI.8.46 : CO25_GE_PCB01_gprs_MT6225_S00.MAUI_GE_W08_12_M361_VI_8_50.20090519.bin
NOTE: Under SW Ver Red & Green color indicates the HW & SW Ver of the phone respectively.
FLASH TOOL




10000000000000% tested
If Display goes Blank/Cant Power On properly after SW Upgrade or Replaced LCD.
Then the problem is due to SW/HW compatibility,need to do the SW upgrade properly as per the
HW.
If the available SW Ver is S:VI.4.34,S:VI.5.39 or S:VI.8.46,then service centers need to do
the SW upgrade as mentioned below. For example
1. For S:VI.4.34 :CO25_GE_PCB01_gprs_MT6225_S00.MAUI_GE_W08_12_M361_VI_9_56.20090707.oldtsb.4in1.bin
2. For S:VI.5.39 : CO25_GE_PCB01_gprs_MT6225_S00.MAUI_GE_W08_12_M361_VI_8_50.20090519.bin
3. For S:VI.8.46 : CO25_GE_PCB01_gprs_MT6225_S00.MAUI_GE_W08_12_M361_VI_8_50.20090519.bin
NOTE: Under SW Ver Red & Green color indicates the HW & SW Ver of the phone respectively.
FLASH TOOL

Bin Files Here
For S:VI.4.3

For S:VI.5.39

For S:VI.8.4

AND ENJOY
Available link for download
Tuesday, 8 November 2016
after installing cm13 no mobile data
after installing cm13 no mobile data
so after i finished installing CM13 on my sgs3 i9300 my wifi works fine, i can sent/receive messages calls work just fine i can call and receive calls but when i try to use internet outside the house i dont have any network.
about the phone:
Model:
GT-I9300
Android-Version:
6.0.1
CyanogenMod-Version:
13.0-20160722-NIGHTLY-i9300
Smallbandversion:
I9300XXELLA
Kernel-Version:
3.0.101-CM-g29bb56e
this is what i have about the phone i dont have a vpn connection with my provider and when i try to look for the settings its all greyed out http://ift.tt/2aiiGXV
any ideas?
NOTE: its in dutch
about the phone:
Model:
GT-I9300
Android-Version:
6.0.1
CyanogenMod-Version:
13.0-20160722-NIGHTLY-i9300
Smallbandversion:
I9300XXELLA
Kernel-Version:
3.0.101-CM-g29bb56e
this is what i have about the phone i dont have a vpn connection with my provider and when i try to look for the settings its all greyed out http://ift.tt/2aiiGXV
any ideas?
NOTE: its in dutch
from xda-developers http://ift.tt/2a3f536
via IFTTT
Available link for download
Sunday, 6 November 2016
Prablame after upgrade
Prablame after upgrade
After upgrade note 3 SM-935F from dark wolf v2 to dark wolf 8.5 I have not orange signal carrier, can somebody help me pleas ?
Thanks
Thanks
from xda-developers http://ift.tt/2aCpE8R
via IFTTT
Available link for download
Sunday, 30 October 2016
Moto G SD card not detected after rooting
Moto G SD card not detected after rooting
Hi,
I have successfully unlocked the bootloader and has full root access to my Moto G. However, I notice that SD card is not now getting detected. I have looked around and dont see any resolutions for this for Moto G.
However, it looks as if it was reported for a HTC mode. And fix suggested was the below ADB commands
fastboot oem enableqxdm 0
But enableqxdm is returning as an unrecognised command. Could anyone help please?:confused:
I have successfully unlocked the bootloader and has full root access to my Moto G. However, I notice that SD card is not now getting detected. I have looked around and dont see any resolutions for this for Moto G.
However, it looks as if it was reported for a HTC mode. And fix suggested was the below ADB commands
fastboot oem enableqxdm 0
But enableqxdm is returning as an unrecognised command. Could anyone help please?:confused:
from xda-developers http://ift.tt/2aaAxBG
via IFTTT
Available link for download
Sunday, 25 September 2016
fingerprint is not working after unlocking bottloader and flashing Twrp
fingerprint is not working after unlocking bottloader and flashing Twrp
I unlocked my red mi note 3 pro device today and flashed twrp but when I try to lock my device with fingerprint it soon reverts back to settings page
from xda-developers http://ift.tt/2a0uSL0
via IFTTT
Available link for download
Labels:
after,
and,
bottloader,
fingerprint,
flashing,
is,
not,
twrp,
unlocking,
working
Tuesday, 20 September 2016
Q Help Nexus 4 stuck in bootloop Recovery after flashing twrp to boot
Q Help Nexus 4 stuck in bootloop Recovery after flashing twrp to boot
Hi,
I made this post/thread because i couldnt find a solution to my problem through this forum and google.
Here is my trouble:
I was trying to install a twrp recovery and was following the instructions of a tutorial.
-So first i installed flashify and proceeded to a back up of the current kernel and current recovery
-Then downloaded a custom recovery image through TWRP release for my nexus 4
-After this i accidentally flashed the recovery image to boot instead of recovery
Now as you can guess the trouble is that my phone only boots to TWRP recovery instead of usual boot.
I tried to find aswers on this forum and google and yet i didnt find a solution.
I tried this post but without results:
http://ift.tt/29XCo9g
I would be grateful for any help and wish to recover this mistake without using a factory reset if possible.
Thank you, as you can see i am pretty new to this environment.
I made this post/thread because i couldnt find a solution to my problem through this forum and google.
Here is my trouble:
I was trying to install a twrp recovery and was following the instructions of a tutorial.
-So first i installed flashify and proceeded to a back up of the current kernel and current recovery
-Then downloaded a custom recovery image through TWRP release for my nexus 4
-After this i accidentally flashed the recovery image to boot instead of recovery
Now as you can guess the trouble is that my phone only boots to TWRP recovery instead of usual boot.
I tried to find aswers on this forum and google and yet i didnt find a solution.
I tried this post but without results:
http://ift.tt/29XCo9g
I would be grateful for any help and wish to recover this mistake without using a factory reset if possible.
Thank you, as you can see i am pretty new to this environment.
from xda-developers http://ift.tt/2aaAaaj
via IFTTT
Available link for download
Subscribe to:
Posts (Atom)