Free Flash Drivers: change

Showing posts with label change. Show all posts

Friday, 11 November 2016

CHANGE REPAIR RESTORE IMEI OF MTK DEVICES

People often face a problem with no network detection on their device which might be due to loss of imei on their device. Some just want to change it for a different purpose. So if you fall in any of this category this tutorial is for you.
To check your imei, dial *#06#.
The following easy steps below will teach you how to RESTORE or CHANGE your imei using your pc.

Note.

Changing of imei is prohibited in some countries.

This Works only on MTK Devices.

Your phone must be rooted before you can do this. learn how to root your device from here

Download Android ADB Drivers here
Download MTK Droid Tools from here.
Extract the file and launch MTKdroidTools

Now turn on USB Debugging by going to Settings > Developer Options > Turn on USB Debugging. On new models goto Settings > About - hit build Number 7 times. you will see you are now a Developer. Go back and select Developers Option then turn on USB Debugging mode.

Connect your phone to your PC with a USB.
MTKdroidTools will dectect the phone.

Now press the ROOT button present in lower right corner. When it asks Supersu grant in your mobile click allow. After MTKdroidTools gets access to the phone should see a green colour box appearing in the lower left corner.

Now Click IMEI/NVRAM

A new dialogue box appears. Input the new imei inside the boxes. imei 1 for Sim 1 and imei 2 for Sim 2. Now click Replace IMEI.

Congrats! you have successfully change/replace your imei.

This same thing can be achieved using Mobile Uncle tools on your Device. I will post a tutorial about that soon.

Available link for download

All Sony Ericsson Mobile IMEI CHANGE

10000000000000000000000% tested BY SE-TOOL

DB2010 CID49 Change IMEI Video FRee Download

Available link for download

Here is trick to change a Ip address in just a minute just follow few simple steps mentioned below

1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "command" and hit OK

You should now be at an MSDOS prompt screen.

4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on your desktop.
7. Click on "properties"

You should now be on a screen with something titled "Local Area Connection", or something close to that, and, if you have a network hooked up, all of your other networks.

8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
10. Click on "Use the following IP address" under the "General" tab
11. Create an IP address (It doesnt matter what it is. I just type 1 and 2 until i fill the area up).
12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again

You should now be back to the "Local Area Connection" screen.

15. Right-click back on "Local Area Connection" and go to properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address automatically"
tongue.gif 18. Hit "Ok"
19. Hit "Ok" again
20. You now have a new IP address

How To Change Your Ip In Less Then 1 Minute/Change Ip Address Manually Here is trick to change a Ip address in just a minute. just follow few simple steps mentioned below. 1. Click on "Start" in the bottom left hand corner of screen 2. Click on "Run" 3. Type in "command" and hit OK You should now be at an MSDOS prompt screen. 4. Type "ipconfig /release" just like that, and hit "enter" 5. Type "exit" and leave the prompt 6. Right-click on "Network Places" or "My Network Places" on your desktop. 7. Click on "properties" You should now be on a screen with something titled "Local Area Connection", or something close to that, and, if you have a network hooked up, all of your other networks. 8. Right click on "Local Area Connection" and click "properties" 9. Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab 10. Click on "Use the following IP address" under the "General" tab 11. Create an IP address (It doesnt matter what it is. I just type 1 and 2 until i fill the area up). 12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers. 13. Hit the "Ok" button here 14. Hit the "Ok" button again You should now be back to the "Local Area Connection" screen. 15. Right-click back on "Local Area Connection" and go to properties again. 16. Go back to the "TCP/IP" settings 17. This time, select "Obtain an IP address automatically" tongue.gif 18. Hit "Ok" 19. Hit "Ok" again 20. You now have a new IP address

Available link for download

3 SIM IMEI CHANGE BY MASTERTOOL BOX

Prod To be sys We have Mastertool
More updates comeing soon ....

Available link for download

CHANGE IP ADDRESS MANUALLY

A time we need privacy that even our tunneler cannot give, so the only option is to hide our internal ip manually. So how do we change our system ip? by following this simple steps below, you will be able to change your ip.

Follow the below steps

1. Click on “Start”
2. Click on “Run”
3. Type in “command” and hit ok.

You should now be at an MSDOS prompt screen.

4. Type “ipconfig /release” just like that, and hit “enter”
5. Type “exit” and leave the prompt
6. Right-click on “Network Places” or “My Network Places” on your desktop.
7. Click on “properties”

You should now be on a screen with something titled “Local Area Connection”, or something close to that, and, if you have a network hooked up, all of your other networks.
8. Right click on “Local Area Connection” and click “properties”
9. Double-click on the “Internet Protocol (TCP/IP)” from the list under the “General” tab
10. Click on “Use the following IP address” under the “General” tab
11. Create an IP address (It doesn’t matter what it is. I just type 1 and 2 until i fill the area up).
12. Press “Tab” and it should automatically fill in the “Subnet Mask” section with default numbers.
13. Hit the “Ok” button here
14. Hit the “Ok” button again
You should now be back to the “Local Area Connection” screen.
15. Right-click back on “Local Area Connection” and go to properties again.
16. Go back to the “TCP/IP” settings
17. This time, select “Obtain an IP address automatically”
18. Hit “Ok”
19. Hit “Ok” again
20. You now have a new IP address
With a little practice, you can easily get this process down to 15 seconds.

NOTE:
This only changes your dynamic IP address, not your ISP/IP address. If you plan on hacking a website with this trick be extremely careful, because if they try a little, they can trace it back

Available link for download

how to change password without knowing old password

In this article I have given the tricks on how to change the password without knowing the existing one. This trick is mainly used for the people who forgot their admin password. The trick is also used to change other user’s password because it will allow you to change the password without knowing the old password. I hope everyone may use this trick for good purpose.

Step 1: Follow the below steps to view all user accounts.

StartàRunà Then type ‘CMD’.
In the command prompt window, type ‘cmd net users’.This will show you the user account on that computer including the hidden accounts.

Step 2: Just follow the below steps to change the account password

Logged into the computer that has administrative rights. Then go to StartàRunàtype ‘CMD’.
In the command prompt window type ‘net user’ space ‘the name of the account’ then * and press enter. Example: net user administrator * or net user "TRICKS GOD" *. (Put the name in quotes if it contains spaces)
It asks you to enter the new password. Type the new password very carefully because command window wont display what you type.
Reenter the same password once again to confirm it.
Then you will get a success message.

You’re done. Now you can access the user accounts.

Available link for download

HOW TO CHANGE OR FIX NULL INVALID IMEI NUMBER OF SPREADTRUM DEVICES LIKE ITEL

If you are having problems with imei number (null/invalid) on any spreadtrum device like itel or for some reason you just want to change the imei number of the device, just follow the procedures below.

Note:

Changing of imei is prohibited in some countries do it at your own risk.

Download Spreadtrum drivers from here

Download Spreadtrum imei write tool from here
Download an install moborobo from here

Enable USB Debugging on the device and connect it to your computer
Wait for moborobo to connect with the device

Launch WriteIMEI

Click Mode Sel and tick Normal Mode

Type in the imei on the desired sim port and click write.

you will see a success message confirming imei change. Reboot your phone for it to take effect

Available link for download

Free Flash Drivers

Pages

Friday, 11 November 2016

CHANGE REPAIR RESTORE IMEI OF MTK DEVICES

CHANGE REPAIR RESTORE IMEI OF MTK DEVICES

Monday, 31 October 2016

All Sony Ericsson Mobile IMEI CHANGE

All Sony Ericsson Mobile IMEI CHANGE

Saturday, 29 October 2016

Here is trick to change a Ip address in just a minute just follow few simple steps mentioned below

Here is trick to change a Ip address in just a minute just follow few simple steps mentioned below

Thursday, 20 October 2016

3 SIM IMEI CHANGE BY MASTERTOOL BOX

3 SIM IMEI CHANGE BY MASTERTOOL BOX

Thursday, 6 October 2016

CHANGE IP ADDRESS MANUALLY

CHANGE IP ADDRESS MANUALLY

Saturday, 1 October 2016

how to change password without knowing old password

how to change password without knowing old password

Monday, 12 September 2016

HOW TO CHANGE OR FIX NULL INVALID IMEI NUMBER OF SPREADTRUM DEVICES LIKE ITEL

HOW TO CHANGE OR FIX NULL INVALID IMEI NUMBER OF SPREADTRUM DEVICES LIKE ITEL