Even if you follow everything step by step, you might make mistake at some time & you would never even know about it. As we are humans! SP Flash Tool has many error codes which it gives under different circumstances. If you are reading this guide, than it means you have tried installing ROM through SP Flash tool & you failed or got stuck at any step. Dont worry we got your back, we have analysed each and every SP Flash Tool error & have found solutions for almost all the problems.
Phone still not working after flashing
Message: Phone still stuck at Bootlogo or Bootloop
Solution:
* Ensure theres a formatted SD card in the phone before flashing
* Give up to 5 minutes because first boot takes time
* Boot the phone into recovery mode then wipe data / factory reset
* Remove the battery for 30 seconds then slot back in
* Try a firmware upgrade . use MTK droid tools version 2.3.0 to backup usrdata & cache or copy then from the clockworkmod backup
* Try a firmware / ROM from another source
Phone shows white screen, strange colors or divided screen after flashing
Message: You can see the phone responding to buttons and making sound but all is blurred by white screen
* Solution: The ROM / Firmware you flashed is incompatible, get from another source (especially boot.img , logo.bin and uboot.bin / lk.bin )
Phone automatically disconnecting during flashing
Message: The phone makes the disconnecting sound just as flashing begins, interrupting the process
Solution:
* Try a different USB cord, USB port & PC
* Try holding down the Volume decrease (you could try volume increase or both) while connecting the phone to PC for flashing
* Launch Device manager (Right-click My Computer > Select Manage)
* Connect the phone to the PC via a USB cord, Device manager should refresh
* Take note of what the phone is detected as (often as Unknown or Mediatek under Other devices)
* Right-click whatever the phone is detect as and select Update Driver Software...
* Select Browse my computer for driver software
* Select Let me pick from a list of device drivers on my computer
* Click Next
* Click Have Disk
* Proceed with the Mediatek (VCOM) driver installation steps described atSP Flash Tool and click Yes if you get an Update Driver warning
Sp Flash tool remains at 0%
Message: Phone only shows charging sign
Meaning: Necessary drivers have not been successfully installed on the PC
Solution:
* Follow this guide @ VCOM Drivers to manually install vcom drivers
Error 5054
Message: BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054)
Meaning: The files youre trying to flash do not belong to or are not compatible with the phone youre trying to flash them to
Solution:
* Ensure youre using the correct files. If youre sure they are, then try formatting before flashing again
Initialize scatter failed
Message: Error: Initialize scatter file failed. Please check the scatter file name you load is legal
Meaning: SP Flash tool doesnt accept the name format of your scatter file
Solution:
* Ensure the scatter file wasnt renamed. If youre certain it wasnt, try a higher version of SP Flash tool
Error 8038
Message: Error 8038! Android download pmt is ready and layout has been changed
Meaning: SP Flash tool is having trouble writing to certain partitions due to some incompatibility
Solution:
* Format the phone in SP flash tool (Do not format Bootloader) then try flashing the files again using Download
* If Download doesnt work then do a firmware upgrade
* If the MTK backup contains more than one scatter file, retry flashing with the other scatter file.
* If that isnt feasible, try formatting first or use firmware upgrade
* If that doesnt work, open the scatter file using Notepad++ and change __NODL_FAT to FAT by removing "__NODL_" .
Error 4032
Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail
Meaning: SP Flash tool is unable to enable DRAM / communicate effectively with the device
Solution:
* Ensure that the file(s) youre trying to flash are actually for your exact phone model
* Ensure you tick the boxes for only the files present in the ROM youre about to flash
* Probably have the wrong driver installed. Uninstall vcom, preloader and MTK drivers using usb deview then manually re-install using SP Flash Tool VCOM Driver
* Delete the sp flash tool folder then re-extract
* Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing.
* If that doesnt work, keep holding down the volume decrease button just before connecting the phone to PC for flashing (you could try volume increase , power + volume decrease or power + volume increase).
* Consider using the latest version of Sp Flash tool
* Format the phone before trying to flash the file(s) again
Error 5056
Message: BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)
Meaning: The size of a file is larger than the available / possible partition size
Solution:
* Ensure that the file(s) youre trying to flash are actually for your exact phone model
* Try another stock ROM
Error 4001
Message: S_FT_DA_NO_RESPONSE or
Meaning: SP flash tool is having difficulty communicating with the device
Solution:
* Change the USB-port
* Run SP flash tool as Admin
* Ensure to install the correct drivers (see SP Flash Tool VCOM Drivers )
* Try another PC and USB cord
* Ensure the phone is switched off with a charged battery inside when connecting to the PC for flashing
Sp flash tool was successful but phones calibration doesnt work
Message: Soft keys and touch screen dont work / respond
Solution:
* Edit the scatter file using Notepad++ and remove NODL__ (or set is_download: false to is_download: true ) in front of the items you have in the backup folder but arent listed when you load the scatter file in SP flash tool. This way, these items will become listed when next you load the scatter file (after saving of course) and therefore flashable
Error 4008
Message: BROM ERROR : S_FT_DOWNLOAD_FAIL (4008)
Meaning: SP Flash tool encountered an error while attempting to flash files
Solution:
* Ensure the battery is in the phone and the phone is switched off before connecting for flashing
* Try using a higher version of SP flash tool
* Change the USB cord and port or PC
* Use the format option then download in SP flash tool
Error 3149
Message: BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
Meaning: SP Flash tool was unable to flash files to the phone
Solution:
* Ensure to run the latest version of SP flash tool as Administrator
* Format first then Download
* Dont tick a box with an unspecified / empty file path
* Ensure the phone is switched off (with a well charged battery in it ) before connecting to PC for flashing
* Try a different PC
* Try a different ROM
* Try a different USB cord
* Try formatting the phone first before flashing files to it
Error 3168
Message: BROM ERROR: S_CHIP_TYRE_NOT_MATCH(3168)
Meaning: Sp flash tool believes theres a mismatch between the information provided in the scatter file and the phones info.
Solution:
* Ensure youre using the ROM for the exact phone model
* Try a higher version of SP flash tool
* Ensure to install the correct drivers for the phone on the PC
Error 2004
Message: BROM ERROR : S_FT_DOWNLOAD_FAIL (2004)
Meaning: There was an interruption in the communication between SP flash tool and the device
Solution:
* Right-click flash_tool.exe > Select Properties > Select Compatibility > Set to Windows XP Service Pack 3 > Click Apply > Click OK > Run SP flash tool as Administrator
* Try a different USB cord
* Try a different port on the PC or another PC
* Ensure the battery is well changed and inside the switched off phone before connecting to PC for flashing
USB device not recognized
Message: USB device not recognized prompt at system tray after connecting the phone to PC
Meaning: The PC is having problems communicating with the phone (often due to interruption, hardware or driver problems)
Solution:
* Follow the guide @ SP Flash Tool VCOM Drivers
* Try a different USB cord, PC port or PC
Error 1013
Message: BROM ERROR:S_COM_PORT_OPEN Fail(1013)
Meaning: SP flash tool encountered an error while attempting to communicate with the phone via the target port
Solution:
* Try using a different port on the PC
* Install VCOM drivers using SP Flash Tool VCOM Drivers
* Ensure the phone is switched off with battery inside before connecting to the PC for flashing
* Try using a different PC
* Try changing the USB cord
* Ensure the phones USB port isnt damaged
Error 2020
Message: BROM ERROR : S_BROM_CHKSUM16_MEM_RESULT_DIFF (2020)
Meaning: SP flash tool encountered a problem moving the files to be flashed into the phones internal SRAM
Solution:
* Use the latest version of SP flash tool
* In SP flash tool, navigate to Options > Option > Connection > Battery. Set it to "with battery".
* Use the Format all + Download option
* Hold both volume bu
Available link for download
