Free Flash Drivers

Motorola Using RSD Lite V6 2 4 Install Stock Firmware

Motorola Using RSD Lite V6 2 4 Install Stock Firmware

Motorola Using RSD Lite V6.2.4 Install Stock Firmware 

 

1. Download the stock firmware file for your Motorola Mobile
2. Download RSD Lite tool and install it on your computer: RSDLite v6.2.4
3. Download and setup Android SDK on your computer.
4. Install Motorola USB Drivers if you have not installed it yet.
5. Enable USB Debugging on your Moto Maxx.
6. Now reboot your Moto Maxx into the Fastboot/Bootloader mode. To do so, launch a command window 
    on your PC, connect your phone to computer via USB cable and type the following line in the command
    window:

 adb reboot bootloader

7. Launch RSDLite and connect your device to computer using USB cable.



8.  Now click the 3-dot (…) button on the Filename field, browse to the firmware file with .zip extension and
    select it.
9.  Finally, click the Start button to initiate firmware installation.
10.Wait patiently while the firmware is being installed. It might take a few minutes.
11.When the installation is finished, reboot your phone

Available link for download