How To Install CyanogenMod 13 Nightly on Samsung Galaxy S5

Samsung Galaxy J3 2016 Duos (SM-J320H) Functions:

• Read / Write certificate

• Repair IMEI

• Read Codes

• Unlock

• Restore / Store backup

• SW Change

• Root/Unroot

• Info

Dear user!

Certainly in the short term and this function will be supported your are applying.

1. This Root process at your own risk and  Galaxy Rom Website Team are not responsible for any damage caused on your phone as a result of doing it the wrong way.

2. This Root is only for Galaxy Core Prime VE SM-G361F and it is not for any other model, so don’t use it in any other model because it may damage your Phone.

3. You may need to make a backup for all of your important data to avoid data lose in case of any mistakes happened.

4.  Your Phone Battery must be 50% at least before starting the Rooting Process.

5.  Do not remove the cable from the phone while the Root is being installed.

6.  Attached images are only for explaining only and you may see small differences.

7.  You should be known that is the Rooting process will avoid your Phone Warranty and you will not be able to use your Warranty anymore and you will not be able to receiving OTA updates even if you removed the Root.

8. Again, this Root is only for Galaxy Core Prime VE SM-G361F not any other model.

Files required for installing the Root Galaxy Core Prime VE SM-G361F

How to Root in Galaxy Core Prime VE SM-G361F :

1. Download CF-Auto-Root for Galaxy Core Prime VE SM-G361F and extract the Zip file, and select the Pre-Rooted-klte-kltedx-smg900f.tar.md5

2.  Download Odin v3.10.7 and extract the Zip file: Odin v3.10.7.Zip

3.  Now, Turn off your phone and Boot your Galaxy Core Prime VE SM-G361F into Download Mode
   by pressing and holding the Volume Down + Home + Power buttons together
   (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.

4. You will get this alert as Shown in the following, press Volume up to continue 

5. Make sure that the USB Debugging mode is enabled, if not go to Developer Options and Enable USB Debugging Mode.

6. Run the Odin v3.10.7.exe or Odin3 v3.07.exe file as Administrator (Right click on the .exe file and Select Run as administrator)

7. Now connect your Galaxy Core Prime VE SM-G361F to your Computer via USB cable.

8. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at

9. ID:COM section and “Added!” text at the message box. This means your

10. device has been detected by Odin3.

11. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.

12. Now, click on the PDA button and select the Pre-Rooted-klte-kltedx-smg900f.tar.md5 file.

13. Finally, click on the Start button to begin the Rooting process, wait a few moments.

14. Once completed, you would see “PASS!” message in ID:COM Section with a Green Background.

15. Your phone should Reboot Automatically. You can now disconnect your phone from your Computer Safely.

• The security of your device has been improved.
• Device stability improvements, bug fixes.
• New and / or enhanced features.
• Further improvements to performance.

Chaina Samsung SM N9006 Official-firmware-flash-file-Free-Download 

Download MT6572

Caution

• This rooting tutorial is only applicable for Samsung Galaxy J5. So, dont try this in any other android device. Check your device model number from- Settings-About Phone. 

• Rooting voids your phones manufacturer warranty. However, you can get back the warranty anytime by flashing official firmware.

• This guide is for educational purpose and you should try this at your own risk. We are not responsible if your device experience a soft brick after following this tutorial.

Pre-Requisites:

• Create a data backup of the device.

• Download Samsung Galaxy J5 USB driver and install the derivers on the device.

• Go to “Settings” > “Developer Options” and then enable USB Debugging mode and OEM unlocking.

• Keep a sufficient battery life (60% – 50%)

• Deactivate your antivirus guard temporary.

How to Root Samsung Galaxy J5 with CF Auto Root

1. Download CF Auto Root for your Galaxy J5 device based on the build number. Go to “Settings” > “About Phone” and get the build number.

[lock]
• Samsung Galaxy J5 SM-J500F

• Samsung Galaxy J5 SM-J500F/DS

• Samsung Galaxy J5 SM-J500FN

• Samsung Galaxy J5 SM-J500G

• Samsung Galaxy J5 SM-J500H

• Samsung Galaxy J5 SM-J500H/DS

[/lock]
2. Extract the downloaded CF Auto root file.

3. Power off the mobile and press and hold “Volume Down”, “Home” and “Power Button” together and boot in to download Mode.
   [ads-post]
4. Connect the device to PC with a USB cable.

5. Run CF Auto Root file and click Odin3. exe file and run the application.

6. You will see “Added” message in Odin if you have installed USB drivers for the device.

7. ID: COM bar will fill in blue color.

8. Click “PDA” and select .tar.md5 file form the extracted folder.

9. Click “Start” and start jailbreak Galaxy J5.

10. Your J5 device will automatically reboot after a successive flashing and you can see a PASS message in green in Odin.